"We Duplicate what We Simulate"TM
New Product Announcement
SUBASSEMBLIES
P/N 61491A-1 ANTENNA INTERFACE ASSEMBLY
P/N 61491A-1 is a multi-channel receiver front end that matches the frequency sensitive complex impedance of an antenna to a 50 ohm load. The interface assembly has four open identical channels and one that is filtered to provide a multi-octave passband. Operational or BIT mode is selected by TTL. Interconnections are GPO blind-mate.
SPECIFICATIONS
- Frequency 650 - 1450 MHz
- Gain 6 dB
- Balance (Channel - Channel) ± 1.0 dB
- Variation with Temperature ± 1.0 dB
- Output VSWR 2.0:1 50 dB Rejection (Filter Channel) 250 MHz, 1850 MHz
- Third Order Intercept +15 dBm
- On/Off Isolation 60 dB
- Channel/Channel Isolation 40 dB
- Switching Speed <200 nanoseconds
- Operational Temp. Range -55° C to +85° C
- Switch Control TTL
- Power Requirements (Other Voltages Available)
- +13 VDC @ 250 mA
- + 5 VDC @ 175 mA
- - 13 VDC @ 60 mA
P/N 41521 QUAD AMPLIFIER (Similar/Not Pictured)
P/N 41521 is a four channel L Band receiver front end for airborne applications. Four identical wide band channels provide gain of 29 ± 1 dB. High Speed internal solid state switches switching is TTL controlled. Interconnections are GPO blind-mate.
SPECIFICATIONS
- Frequency 650 - 1450 MHz
- Gain 29 dB
- Flatness ± 1.0 dB
- Balance (Channel - Channel) ± 0.5 dB
- Variation with Temperature ± 1.0 dB
- VSWR 1.5:1
- Output 1 dB Compression Point +15 dBm
- On/Off Isolation 60 dB
- Channel/Channel Isolation 40 dB
- 50 dB Rejection (DC to 250 MHz, 2.4 GHz-20 GHz)
- Switching Speed <200 nanoseconds
- Operational Temp. Range -55° C to +95° C
- Switch Control TTL
- Power Requirements (Other Voltages Available)
- +13 VDC @ 200 mA
- + 5 VDC @ 200 mA
- - 13 VDC @ 15 mA
To order: queries@.rsmicro.com.
Back to RS Microwave Company home page
You can e-mail us at queries@.rsmicro.com.
This page last updated on 4/28/97;3/12/08
Copyright © 1997 RS Microwave Company, Inc.