SPECIAL PRODUCTS
DIPLEXERS
The PN 01091BD has the following specifications:
Channel 1: 1020-1040
MHz, max. loss 5.5 dB over band
Channel 2: 1080-1100
MHz, max. loss 5.5 dB over band
Operating RF power: 800 W peak, 2% duty
Rejections (either channel):
-70 dB minimum: 969-1008, 1053-1065,
1113-1206 MHz
-100 dB minimum: 1217-1238, 1565-1586 MHz
Outline Drawing
TEST DATA
DUAL BANDPASS/NOTCH FILTERS
The 5091T provides Notch Filtering of 1030 and 1090 Mhz for IPF protection
and in a parallel path provides dual 1030 and 1090 Mhz Bandpass outputs
for IPF monitoring and processing.
NOTCH CHARACTERISTICS
BANDPASS CHARACTERISTICS
| Notch (MHz) |
NOTCH
REJECTION |
VSWR |
PASSBANDS
(-3 dB) |
LOSS (dB) |
PASSBAND
REJECTION |
VSWR |
| 1030+/-7 |
15 dBc |
1.8:1 |
1030+/-7 |
10 dB |
-70 dBc @
Fo+/- 20 MHz |
1.8:1 |
| 1090+/-7 |
|
|
|
|
|
|
Insertion loss in the passbands (962-1099, 1052.5-1065, and 1112-1220
Mhz) is 2.0 dB Max (0.7 dB Typ).
VSWR is 1.8:1 Max. Group delay is 20 Nanosec Max.
The 50941T is 5.6 x 3.3 x 0.63” in size excluding connectors.
It is designed for 250 Watt operation to 70,000 Ft. (21,340M) and temperatures
of -30ºC to +65ºC.
SWITCHABLE FILTERS
** Control EMC Problems Dynamically
** Pin Diode Switches
**Selective Filtering of JTIDS/TACAN/IFF Transmissions
** 250 WATTS Peak Power
** Compact Airborne Assemblies
** TTL or Custom Switching Logic Available
** 2 Microsec Switching Time
RS Microwave produces airborne switchable Notch Filters that permit
selective switching of 1030 Mhz Notch filters in and out of a transmit
path on a pulse by pulse basis to eliminate interference between TACAN,
IFF and JTIDS transmissions. All contain integral drivers.
| Part No. |
Notch Band (MHz) |
REJECTION (dB) |
GROUP DELAY |
SWITCHING LOGIC |
PRIME
POWER |
Size (Inches) |
| 32401-3 |
1030±7 |
35 |
60 Nanosec |
TTL |
-50 VDC |
8.24 x 4.45 x 2.00 |
| 32401-6 |
1030±7 |
45 |
60 Nanosec |
12V/0V |
+28 VDC |
7.25 x 5.50 x 2.18 |
| 50703-1 |
1030±7 |
35 |
60 Nanosec |
TTL |
+28VDC |
6.00 x 2.00 x 1.60 |
50703-1 uses a ceramic dielectric.
NOTCH FILTER ASSEMBLIES
** 125 Watt to 1250 Watt Operation
** Dual Notch Filtering
** Duplexing for Transmit/Receive from Single
Antennas
50524-1
The 50524-1 is a compact assembly for 125 Watt operation
from a 125 Watt transmitter.
-
Operating Frequency:
962-1215MHz
-
Passband Transmit Insertion Loss:
1.1 dB Max. (0.7 dB Typ)
-
VSWR:
1.6:1 Max
-
Passband Group Delay:
100 Nanosec Max.
-
Reject Bands:
1023-1037, 1083-1097 Mhz
-
Rejection:
30 dBc Min.
-
Size:
6.80 x 2.0 x 1.5”
50524-2
The 50524-2 is designed for 125 Watt operation but
provides greater rejection than 50524-1.
-
Operating Frequency:
962-1215 Mhz
-
Passband Transmit Insertion Loss:
1.4 dB Max. (0.7 dB Typ)
-
VSWR:
1.6:1 Max.
-
Passband Group Delay:
100 Nanosec Max.
-
Reject Bands:
1023-1037, 1083-1097 Mhz
-
Rejection:
54 dBc Min.
-
Size:
8.50 x 2.0 x 1.5”
61351 (Click here for current
outline drawings 1 &
2)
The 61351 is designed for Class 2H (1250 Watt) operation
on shipboard. It is MIL Qualified and is nomenclatured as F-1628/URC-107(V)7.
-
Operating Frequency:
967.5-1207.5 Mhz
-
Passband Transmit Insertion Loss:
1.65 dB Max (0.7 dB Typ)
-
Receive Passband Insertion Loss:
0.65 dB Max (0.3 dB Typ)
-
VSWR:
2.0:1 MAX (1.3:1 TYP)
-
Passband Group Delay
100 Nanosec Max
-
Reject Bands:
1024.5 - 1040.5, 1083.5 - 103.5 MHz
-
Rejection:
54 dBc Minimum
-
Size:
40.90 x 7.50 x 2.16” (1039 x 190.5 x 55 mm)
83521B
The 83521B is designed for Class 2 or 2H operation.
It is switchable between inputs from R/Ts or HPAs. It
is MIL Qualified and nomenclatured as F-1369/URC-107(V)7.
-
Operating Frequency:
967.5 - 1207.5 MHz
-
R/T Transmit Passband Insertion Loss:
2.2 dB Max. (1.6 dB Typ)
-
HPA Transmit Passband Insertion Loss:
1.8 dB Max. (1.3 dB Typ)
-
Receive Passband Insertion Loss:
2.0 dB Max. (1.5 dB Typ)
-
VSWR:
2.0:1 Max. (1.6:1 Typ)
-
Passband Group Delay:
66 Nanosec Max.
-
Reject Bands:
1023 - 1037, 1083 - 1097 MHz 1030 MHz
-
Band Rejection:
20 dB Min. 1090 MHz
-
Rejection:
66 dB Min.
-
Size:
20.50 x 10.00 x 7.00” (521 x 254 x 178 mm)