JTIDS3.htm

DUAL BANDPASS FILTERS

**1023=1037 and 1083-1097 MHz Bandpass Filters in one package
**70 dB Rejection at Fo+/-20 MHz
**IPF Measurements in One Assembly
**Available with pins or with GPO Connectors for isolation

Dual bandpass filters allow monitor of the 1030 and 1090 MHz bands. Only those frequency bands are passed to the IPF Monitor Circuits of the processor. The filters exhibit sharp rejection at Fo+/-20 MHz.

Part No.	Passbands (-3dB)	Loss (dB)	REJECTION (dB)	VSWR	Size (Inches)
01091BD**	1030,1090 +/-10	5.5	70	1.5:1	8.8 x 5.4 x 1.9
32161-1	1030,1090+/-7	12	75	1.5:1	4.25 x 1.20 x 0.38
33271D	1030,1090+/-7	2	20	1.6:1	4.50 x 1.60 x 1.60
60292	1030,1090+/-7	15	80	2.0:1	5.00 x 1.01 x 0.805

**DIPLEXER

[PICTURE P/N 60292] Part 60292

DIPLEXERS

Part No.	PASSBAND(-3 dB)	Loss (dB)	STOPBANDS( MHz)	REJECTION (dB)	VSWR	Size (inches)
01091BD	1030,1090 +/-10	5.5	969-1008,1053-1065,1113-1206	-70	1.5:1	8.8 x 5.4 x 1.9
32161-6	1030, 1090 +/-7	10	1010, 1050, 1070, 1110	-70	1.6:1	5.30 x 1.20 x 0.38
43371D	1030, 1090 +/-7	8.5	1090, 1030	-60	1.6:1	2.60 x 1.20 x 1.20